Storage System Solutions

Join our Community
Section 508 support
RoHS




 
Printable Version
 

 

Home > Products > Disk Array > 2.5" Snap-In Disk Array

The new Addonics 2.5" Snap-In Disk Array is a high density removable hard drive system that supports installing up to four 2.5" SATA hard drives or SSDs into one standard 5.25" drive bay. This compact form factor makes this Disk Array an ideal solution for increasing hard drive storage in small computers, mini ATX systems or for applications that require large number of drives.

Installing hard drives into the 2.5" Snap-In Disk Array is similar to using a VHS cassette. Simply unlatch to open the door on each drive slot, slide in the hard drive and close the drive door to engage power and data connection. When the drive door is opened, the hard drive will automatically be ejected out of the drive slot. Each drive slot is also equipped with a lock The back plane connector in this Disk Array is designed to support both SATA and SAS device. Designed to accommodates any 2.5" SATA hard drive or SSD with drive height up to 12.7 mm. Eeach drive slot is equipped with its own power and drive access LEDs as well as a lock on the drive door to secure each hard drive in the Disk Array unit.


Examples of the 2.5" Snap-In Disk Array installed into different type of computer or storage chassis
In generic Desktop Tower In Z-Family Enclosure In Storage Tower V In Storage Rack In HDD Duplicators

Product features

  • Install as many as four 2.5" SATA hard drives or SSDs into a standard 5 1/4" drive bay
  • Support SATA I / II / III or SAS hard drive or SSD with drive height up to 12.7 mm
  • Drive is added and removed directly like VCR cassette without any special tool
  • Point to point connection
  • High throughput up to 600 MB/sec with SATA 3.0 or SAS 2.0 drive
  • Sturdy steel metal construction
  • Hot swap support when connects to SATA port that supports this feature
  • Four separate 7-pin SATA data connections and four 15-pin SATA power connections
  • Power and drive activity LED for each drive slot

(1) Serial ATA hot swap feature works only with controllers basing on Silicon Image chip set from our in house testing. Other controllers that are not Silicon Image based may not support hot swap. You may consider adding one of the Addonics Serial ATA host controllers to your systems to ensure the hot swap capability. New controllers from Intel and other suppliers may finally support this feature. Please verify with your controller manufacturer if you need to have hot swap in your application. Hot swap is supported in Windows 2000 and XP only. On other OS, drive can be removed without crashing system. But replacing with a different drive can result in crashing the OS.

Part number and price

Model

Description and Package Content

Click shopping cart to check price and order online
AESN4DA25
2.5" Snap-In Disk Array

Package content: 2.5" Snap-In Disk Array, four 50-cm internal SATA connecting cables (AASAIDC18I), four combo SATA power and LED cables, user guide, mounting screws

$69.95 click to check price and shop online



Model
Accessories
Click shopping cart to check price and order online
AASAIDC18I click for large image
internal SATA cable 18"
$3 click to check price and shop online
AASAIDC36I click for large image
internal SATA cable 36 "
$3 click to check price and shop online
AASA90L18I click for large image
internal standard SATA - SATA 90 degree left angle cable 18"
$3.99 click to check price and shop online
AASA90R18I click for large image
internal standard SATA - SATA 90 degree right angle cable 18"
$3.99 click to check price and shop online



Specification

Interface

SATA / /SAS

Construction material
Steel
Hard Drive type
2.5" SATA/SAS, SATA/SAS II or SATA/SAS III
Maximum Number of Drives
4
Maximum drive height
12.7 mm
supports drive height of 9mm, 12.5mm
Maximum Data Transfer Rate
6Gbps
Power Connection
four 15-pin SATA power connectors
Connections
four 7-pin SATA connectors
LED's
Power and drive Activity LEDs for each drive slot
Lock
key lock for each drive slot
Hard Drive Connection
Point to point, no cable required for installing hard drive
Weight (with no hard drive)
~1.46lb (662g)
Dimensions (L x W x H)
5.5 x 5.75 x 1.65 in.(140 x146 x 42 mm)

Operating Temperature and Humidity:

5°C - 60 °C, 10% - 90% RH

Storage Temperature and Humidity:

-20°C - 70 °C, 5% - 95% RH non condensing

File Systems
File system Independent
Warranty
One Year

 

System requirement

  • PC/AT or Compatible System
  • SATA port
  • one 5 1/4" drive bay
  • Pentium or greater
  • Minimum 32 MB RAM
  • 10 MB minimum free hard disk space
All specifications are subject to change without notice